Vacuum Infusion
Resin drawn in by vacuum pressure — superior mechanical properties, low void content.
Vacuum Infusion What Is It?
Vacuum infusion is based on laying dry reinforcement into a single-sided mould and then drawing resin into the fibre stack by vacuum. The high fibre volume fraction delivers superior mechanical properties.
It is extremely effective on large parts and is the preferred route for wind turbine blades, boat hulls and large structural panels. The low void content guarantees high mechanical performance.
- Parts with high mechanical performance
- ISO certified production process
- Customer-specific design and prototyping
- Fast transition to series production
PRODUCTION THE PROCESS
The mould surface is cleaned and release agent applied. Dimensional and surface quality checks are carried out.
The fibre type and orientation defined by the design are applied. Ply count is optimised to the mechanical requirements.
The resin system is mixed to precise ratios. The fibre is fully wetted out and void content minimised.
Ambient or oven cure is applied according to the material system, with time and temperature optimised.
After full cure the part is demoulded and the first dimensional and visual checks are made.
Trimming, drilling and surface finishing are completed. After quality approval the product is ready for dispatch.
KEY ADVANTAGES
Superior Quality
Manufacturing to international standards. Every part passes through quality control.
Optimal Weight
Minimum weight for maximum performance. The fibre-to-resin ratio is optimised.
Dimensional Accuracy
Full compliance with customer tolerances, with high repeatability and consistency.
Technical Support
Engineering support from project start to delivery, including design improvement proposals.
LET'S MANUFACTURE BY VACUUM INFUSION
Discuss with our specialists whether this method suits your project.
Get Free Consultation